X1 Pro Gen 3: Firmware

S X1 Pro Gen 3: Firmware

NOTICE: If you have an X12 controller with a Gen 4 motor version, please refer to the X1 Pro Gen 4 section instead.

Latest X1 Pro Gen 3 Firmware: 240614

For X12 Controller

X12-181-OQC-240614-PRO3.bin

bin

For X6 Controller

X6-181-OQC-240614-PRO.bin

bin

Updating Firmware Via the CYC Ride Control App

To update your current firmware to the latest version, follow the steps below:

Connect to the CYC Ride Control App.
Navigate to the Firmware settings section of the app.
Check if there are any updates available.
If yes, follow the on-screen prompts to update and wait for the file to finish loading.

IMPORTANT: Wait for the file to load fully. DO NOT interrupt the process or close the app.

Reflash Via CYC Firmware Update App

Download the CYC Firmware Update App

Andriod: https://play.google.com/store/apps/details?id=com.cyc.firmware_update&hl=en&pli=1

iOS: https://apps.apple.com/gb/app/e-bike-firmware-update/id6449957197

Download the X1 Pro Gen 3 firmware file and save it to your phone’s internal storage.
Note that you do not need to be able to open the file. Just save it to your mobile device.
The file can be downloaded here: https://drive.google.com/drive/folders/1xTGl5koCsEkxLgHoLoZFDxV7CbLx5RXG?usp=drive_link

Turn on your kit & connect to the CYC Firmware Update App.

Go to Choose File

Select the firmware file that you have downloaded in step 2.

Wait for the firmware to load.

IMPORTANT:

Wait for the file to fully load and DO NOT interrupt the process or close the app.
Please refrain from sharing this password unless needed. Incorrectly changing settings that require this password may result in issues/ damages that will not be warranted. Always reach out to CYC or an authorized distributor to ensure you are changing the correct settings if needed.

Reflash Via CYC Ride Control App

Please follow the steps below to reflash your firmware:

Download the X1 Pro Gen 3 firmware file and save it to your phone’s internal storage.
Note that you do not need to be able to open the file. Just save it to your mobile device.
Turn on your kit & connect to the CYC Ride Control app.
Go to the “Firmware” section & select the “Choose file” function.
You will need a password listed below for the update action.
Password: 32531
Select the firmware file that you have downloaded in step 1.
Wait for the firmware to load.

IMPORTANT:

Wait for the file to fully load and DO NOT interrupt the process or close the app.
Please refrain from sharing this password unless needed. Incorrectly changing settings that require this password may result in issues/ damages that will not be warranted. Always reach out to CYC or an authorized distributor to ensure you are changing the correct settings if needed.

Reflash Via PC

Getting Started

What’s needed:

X-Series Controller Programming Wire
ST-LINK Utility Software
Controller Firmware File

Install Software and Files

Install the software and files needed to your PC via the Google Drive link below:

https://drive.google.com/drive/folders/1cO2nXipgDp57JteDYXAHEp1LNTmkGJmm?usp=sharing

X12-OQC-PRO4-240110.bin = X1 Pro Gen 4

Once downloaded, double-click on the .exe file to install the ST-LINK Utility software. Follow the prompts accordingly to install the application successfully.

Connect to your PC

Plug in the ST-LINK V2 USB ADAPTER into your PC. Then, connect the controller with the battery, and display. Afterward, plug the 7-pin peripheral harness into the controller and turn on the controller with the display.

Open the ST-LINK Utility software on your computer. Press the below-indicated button to connect and follow the prompts to upload the firmware.

The

Download dialog will pop up. Click Browse to select the firmware (file extension*.bin) and leave the other options as default. Then click the Start button at the bottom of the dialog.

Once the bar has loaded completely, it has finished loading and the controller is now loaded with the new firmware.

“Verification…OK” will be shown once the firmware update is completed.

Unplug the 7-pin peripheral harness to disconnect and complete the procedure.

IMPORTANT –

PLEASE CHECK YOUR APP AND PERIPHERALS ERROR FIX

If you see this message while the controller is on, and the ebike display shows “Please check your app and peripherals”, and you’ve ensured that your 7-pin programmer harness is correctly plugged into the controller and PC, this indicates that the controller is bricked.

Reattempt the process from the start.

If the second reflash attempt does not fix the errors, please contact CYC or an authorized Dealer to arrange a replacement.

X1 Pro Gen 3 Firmware Database

Current Default Firmware

Version 20240614

Download here: