Belt Drives

X1 Pro & X1 Stealth

The X1 Pro and X1 Stealth kits run a standard 104BCD inner chainring so you can easily swap it out with a belt drive compatible chainring. The belt width is not recommended to be more than 15mm. 

• Gates and Veer compatible
• Please note that only chainring driving the cassette can be swapped to a belt drive. The 219H motor chainring cannot be swapped.

More examples can be found here: Belt Drive Setups

Photon 2/Pro

Belt drive systems are currently not compatible with the Photon 2/Pro as the chainring fitment is not standard.